美國SMAC Corporation推出Z-θ 軸向移動兼線性轉動式致動器

　　SMAC Corporation開賣的「Z-θ 軸向移動兼線性轉動式致動器(Z-theta linear rotary actuator)」能自動化組裝M0.6~M1.6小螺絲。這個「機械式螺絲起子」能用來自動化微型螺絲的鉆入與攻入作業、螺紋檢查和螺絲的緊固作業。該公司預測這個智慧化螺絲起子創新并突破了精密產品(例如需用到M0.6等等1厘米以下螺絲的醫療裝置、可植入人體的裝置和可穿戴式裝置)的組裝作業。它特別適用于那些超過人工組裝能力極限的M1.6或更小的微型螺絲組裝作業。

　　產品特色：可將最小達M0.6的螺絲移動到事先鉆好的孔洞上并執行緩慢著座的程序;讓螺絲和孔洞的螺紋能相互接合并避免亂牙;讓螺紋能彼此適配;能以設定好的扭力將螺絲旋入;能檢查轉數和深度;在需要時能讓螺絲貼合;能設定最終扭力并在施加扭力后做檢測。

　　=================================================================================================

　　Robotic Screwdriver Capable of M0.6-M1.6 with Built-In 100% Quality Feedback

　　SMAC Moving Coil Actuators has launched sales of Z-theta linear rotary actuators capable of automated assembly of small screws, size range M0.6-M1.6. The "robotic screwdriver" could be used to automate micro-screw drilling, tapping, thread check, and screw tightening. SMAC predicts that the smart screwdriver is a breakthrough for assembling precise products such as medical/implantable devices and wearable devices that require sub millimeter screw (M0.6). The SMAC solution is especially useful for M1.6 or smaller micro screw assembly as this size is outside human worker assembly limits.

　　Product features: The ability to move a small screw - as small as M0.6 - to the tapped hole and perform a Soft-Land routine, the ability to engage screw-threads and hole-threads to prevent cross threading, the ability to thread match, the ability to screw into threads with programmed torque, the ability to check number of turns and depth, the ability to “snug” screw when required, the ability to set programmed final torque and verify movement after this torque is applied.